Wagner Tuning Performance Ladel air cooler Kit Mercedes Benz GLE43 AMG 292

Performance INTERCOOLER KIT Mercedes Benz C / E / GLC 43 AMG

Mercedes Benz W/S/C/A 205 C400 4MATIC 2014-2018

Mercedes Benz W/S/C/A 205 C450AMG 4MATIC 2015-2016

Mercedes Benz W/S/C/A 205 C43 AMG 4MATIC 2016-

Mercedes Benz W/S/C/A 213 E43 AMG 4MATIC 2016-2018

Mercedes Benz W/S/C/A 213 E450 AMG 4MATIC 2018-06/2020

Mercedes Benz X/C 253 GLC 43 AMG 4MATIC 2016-2019

Mercedes Benz C 292 GLE 43 AMG 4MATIC 2015-2019

The 3.0-liter V6 biturbo engine (M 276 DE 30 AL) of the Mercedes 43 AMG models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore realized by a water-cooled intercooler, which has been replaced by the WagnerTuning high-performance intercooler.

The WAGNERTUNING high-performance intercooler features a new performance core measuring 222 mm x 297 mm x 95 mm. It was specifically developed to meet the demanding requirements of the 43 AMG engine and offers 133% more external core volume than the original intercooler. The ratio of inner to outer cooling surface generates maximum heat transfer while simultaneously enabling the best possible internal airflow. The cast aluminum end boxes were designed using CAD and optimized with the aid of CFD simulations. The result is excellent cooling properties with minimal backpressure. This kit is also suitable for racing. Optimal cooling of the charged air with a significant increase in performance!

All WAGNERTUNING intercoolers are equipped with a heat-conducting, anti-corrosion coating, ensuring a lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions.

Advantages of this product:

- significantly better cooling performance

- less back pressure

- more power and torque for your engine

- mechanical relief of the turbocharger

- 100% compressive strength

- 100% Plug and Play

- up to 4 years warranty

- including Ø57mm (2.25inch) aluminum boost pipe

- optionally with 2 1/8NPT WMI connections in the upper end box

OEM intercooler mesh dimensions:

200 mm x 207 mm x 65 mm

V = 2.7 liters

Net dimensions WT intercooler:

222 mm x 297 mm x 95 mm

V = 6.3 liters

Not permitted in the area of ​​the STVO.

We receive a large number of custom orders and requests every day, so it's not always possible for us to have every item in stock at all times. If you need the item urgently, please contact us. here to our sales teamto check stock before making your purchase.

We fully understand if you are unsure whether a part is compatible with your car. Therefore, we strongly recommend that you contact your Inquiry to us Our friendly sales team will then contact you to confirm if this part is the right one you are looking for.

All our products come with a standard 2-year warranty. However, this depends on the type of product. For more details, see here.

At Upgrade my Car (R-Trade GmbH), we take great care to fully inform our customers about the intended use of our products. Please note that, unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competitions on racetracks sanctioned by an officially recognized racing organization. We would like to point out that any use of our products outside of these terms and conditions, including recreational off-road use, may potentially violate local, state, or federal laws. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the purchaser. We strongly recommend that our customers familiarize themselves with and comply with applicable legal regulations before using our products.