Wagner Tuning Performance Intercooler Kit Mercedes Benz GLC43 AMG 253

Performance INTERCOOLER KIT Mercedes Benz C / E / GLC 43 AMG

Mercedes Benz W205 C400 4MATIC 2014-2018

Mercedes Benz W205 C450AMG 4MATIC 2015-2016

Mercedes Benz W/S/C/A 205 C43 AMG 4MATIC 2016-

Mercedes Benz W/S/C/A 213 E43 AMG 4MATIC 2016-2018

Mercedes Benz W/S/C/A 213 E450 AMG 4MATIC 2018-06/2020

Mercedes Benz C 253 GLC 43 AMG 4MATIC 2016-2019

Mercedes Benz C 292 GLE 43 AMG 4MATIC 2015-2019

The 3.0 liter V6 biturbo engine (M 276 DE 30 AL) of the Mercedes 43 AMG models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is therefore carried out by a water-cooled charge air cooler, which is replaced by the WagnerTuning high-performance charge air cooler.

The WAGNERTUNING high-performance intercooler has a new performance mesh with dimensions of 222 mm x 297 mm x 95 mm. This was specially developed for the high demands of the 43 AMG engine and offers 133% more external mesh volume compared to the original intercooler. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time enables the best possible internal air flow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties with the lowest back pressure. This kit is therefore also suitable for racing. Optimal cooling of the charged air with a significant increase in performance!

All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also straightforward and plug & play with the help of our installation instructions.

Advantages of this product:

- significantly better cooling performance

- less back pressure

- more power and torque for your engine

- mechanical relief of the turbocharger

- 100% compressive strength

- 100% Plug-and-Play

- up to 4 years warranty

- incl. Ø57mm (2.25inch) aluminium boost pipe

- optionally with 2x 1/8NPT WMI connections in the upper end box

OEM intercooler core dimensions:

200mm x 207mm x 65mm

V = 2.7 liters

WT intercooler network dimensions:

222mm x 297mm x 95mm

V = 6.3 liters

Not permitted under the STVO.

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.