Skoda Fabia PJ front parking aid visual representation retrofit package

Significantly upgrade your SKODA Fabia PJ with the original Park Pilot with OPS on the front of the vehicle.

When you engage reverse gear or press the new button in the interior, the parking aid system is activated and the image of the optical parking aid (OPS) appears.

Scope of delivery:

• - 1x all necessary SKODA Fabia PJ original parts such as PDC control unit front and rear, 4x PDC sensors, warning sounder, 4x brackets, ParkPilot button strip, etc.
• - 1x pre-assembled cable sets
• - 1x installation instructions (German)

Installation time approx. 4 hours

Please provide the chassis number during the ordering process

Please select the color of the sensors.

Please note the exclusion for vehicles from model year 2023 onwards with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG) or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156)) or installed PR number NI9 (NI9 = With UNECE CS&SU) or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, these models cannot be retrofitted or unlocked.

Vehicles from model year 2023 with installed PR number NI0 (NI0 = Without UNECE CS&SU) can only be upgraded to a limited extent. Please contact us in advance with the chassis number so that we can check this. Vehicles from previous model years (e.g. 2022, 2021, 2020, etc., where this PR number does not yet exist) can still be retrofitted.

Product attributes:

The retrofitting of the original parking aid system / Park Pilot Front with optical display is possible on all SKODA Fabia PJ models of all body styles and all equipment variants WITH already installed original parking aid at the rear (PR number: 7X1).

This retrofit package is planned specifically for your SKODA Fabia PJ.

We are happy to supply you with PDC sensors already painted in the correct vehicle colors.

Painting work is carried out by a master automotive paint shop using your chassis number / the paint codes stored there.

If you do not want us to paint the PDC sensors, they will be delivered primed.

Of course, we supply you with the original brackets for mounting the PDC sensors in your bumper WITHOUT PDC preparation.

The existing bumper can of course be reused - there are factory markings on the inside - the holes are to be drilled / punched / inserted here.

We receive a large number of custom orders and requests every day, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact here to our sales teamto check stock before making your purchase.

We fully understand if you are unsure if a part is compatible with your car, so we strongly recommend you to contact your request to us Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty, however this depends on the type of product. For more details please see here.

At Upgrade my Car (R-Trade GmbH) we place great importance on fully informing our customers about the intended use of our products. Please note that, unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competitions on race tracks approved by an officially recognized racing organization. We would like to point out that any use of our products outside of these terms and conditions, including recreational off-road driving, may potentially violate local, state or federal laws. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws rests solely with the purchaser. We strongly recommend that our customers familiarize themselves with and comply with the respective legal regulations before using our products.