SEAT Arona KJ7 rear parking aid with OPS retrofit package

Significantly upgrade your SEAT Arona KJ7 with the rear Park Pilot.

When you engage reverse gear, the parking assistance system is activated and the image of the optical parking assistance (OPS) with display of the rear parking assistance sensors appears in your multimedia system.

+ acoustic warning through the original adjustable warning sounder in the rear interior

+ Sensors are mounted at the already marked locations on the bumper

Scope of delivery:

- 1x all necessary SEAT Arona KJ7 original parts such as control unit, 4x PDC sensors, warning sounder, 4x PDC sensor holder, 4x PDC sensor sealing ring, etc. (depending on model)

- 1x cable set PDC rear control unit

- 1x cable set PDC rear bumper

- 1x installation instructions (German)

Installation time: approx. 4 hours

Please provide the chassis number during the ordering process.

Please note the exclusion for vehicles from model year 2023 onwards with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG) or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156)) or installed PR number NI9 (NI9 = With UNECE CS&SU) or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, these models cannot be retrofitted or unlocked.

Vehicles from model year 2023 with installed PR number NI0 (NI0 = Without UNECE CS&SU) can only be upgraded to a limited extent. Please contact us in advance with the chassis number so that we can check this. Vehicles from previous model years (e.g. 2022, 2021, 2020, etc., where this PR number does not yet exist) can still be retrofitted.

Product attributes:

The retrofitting of the rear parking aid / Park Pilot Rear with optical display OPS is possible on all SEAT Arona KJ7 models of all years of manufacture and all equipment variants without an existing original parking aid at the rear (= PR number 7X0).

The existing rear bumper of your SEAT Arona KJ7 can be reused without any problem.

4 sensors are located in the rear bumper

Since we describe all steps for activation with a tester (e.g. VCDS) in our installation instructions, no coding dongle is necessary.

We receive a large number of custom orders and requests every day, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact here to our sales teamto check stock before making your purchase.

We fully understand if you are unsure if a part is compatible with your car, so we strongly recommend you to contact your request to us Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty, however this depends on the type of product. For more details please see here.

At Upgrade my Car (R-Trade GmbH) we place great importance on fully informing our customers about the intended use of our products. Please note that, unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competitions on race tracks approved by an officially recognized racing organization. We would like to point out that any use of our products outside of these terms and conditions, including recreational off-road driving, may potentially violate local, state or federal laws. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws rests solely with the purchaser. We strongly recommend that our customers familiarize themselves with and comply with the respective legal regulations before using our products.