Audi Q2 GA Hill Hold Hill Start Assist retrofit package

Significantly upgrade your AUDI Q2 GA with the original hill start assist / hill hold.

This means your AUDI Q2 will automatically stop where you are WITHOUT having to press the brake pedal.

A significant increase in comfort in traffic jams or at traffic lights!

After briefly plugging it into the very easily accessible OBD diagnostic interface in the driver's footwell, the KECODI coding interface supplied here uses the innovative KECODI that is already preset for you to fully automatically activate the hill start assist - NO further coding work with a tester is necessary.

Scope of delivery:

• - 1x Original AUDI Q2 GA HillHold button (depending on selection)
• - 1x pre-assembled cable set
• - 1x KECODI interface
• - 1x KECODI interface storage case
• - 1x installation instructions (German

Installation time: approx. 2 hours

Please select whether you want the button with or without a chrome edge and write this in the comment field.

Please note the exclusion for vehicles from model year 2023 onwards with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG) or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156)) or installed PR number NI9 (NI9 = With UNECE CS&SU) or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, these models cannot be retrofitted or unlocked.

Vehicles from model year 2023 with installed PR number NI0 (NI0 = Without UNECE CS&SU) can only be upgraded to a limited extent. Please contact us in advance with the chassis number so that we can check this. Vehicles from previous model years (e.g. 2022, 2021, 2020, etc., where this PR number does not yet exist) can still be retrofitted.

Product attributes:

The retrofitting of the original Hill Hold / Auto Hold / Hill Start Assist is possible on all AUDI Q2 / SQ2 GA models of all years of manufacture as well as all equipment variants / transmission versions (automatic / DSG / multitronic / s-tronic as well as manual transmission).

Please select the desired button (with or without chrome) during the ordering process.

If your parking brake switch is already designed with the upper "chrome bar", we also recommend installing the HillHold button in the "chrome" version.

Functional description:

You can stop on a slope WITHOUT USING THE BRAKE PEDAL without rolling backwards or forwards.

You can leave the automatic gearshift lever on D/S and take your foot off the brake - the vehicle will ALWAYS stay in one place without moving - by pressing the accelerator pedal your AUDI will start moving again immediately (even if the start/stop system is switched on).

With manual transmissions, it is sufficient to operate the clutch with the gear engaged OR, as with automatic models, not to operate any pedal at all.

You no longer need to apply the parking brake if you want to get out of the vehicle for a short time, etc.

When you park your AUDI you no longer need to use the handbrake - after removing the ignition key (or pressing a button with KeylessGo) the engine switches off AND the parking brake is applied automatically (the handbrake is activated).

You can activate or deactivate the system at any time by pressing a button on the new parking brake switch.

A very comfortable special equipment for your AUDI Q2 GA.

We receive a large number of custom orders and requests every day, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact here to our sales teamto check stock before making your purchase.

We fully understand if you are unsure if a part is compatible with your car, so we strongly recommend you to contact your request to us Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty, however this depends on the type of product. For more details please see here.

At Upgrade my Car (R-Trade GmbH) we place great importance on fully informing our customers about the intended use of our products. Please note that, unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competitions on race tracks approved by an officially recognized racing organization. We would like to point out that any use of our products outside of these terms and conditions, including recreational off-road driving, may potentially violate local, state or federal laws. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws rests solely with the purchaser. We strongly recommend that our customers familiarize themselves with and comply with the respective legal regulations before using our products.