Audi A6 4G C7 parking steering assistant retrofit package pre-facelift until 2014

Significantly upgrade your Audi A6 4G with the original parking steering assistant with surrounding display.

Here we supply you with the complete package for retrofitting the original parking steering assistant for your AUDI A6 4G.

Your benefits:

+ Recognition of parking spaces possible when driving past

+ better visual representation of the parking aid in the MMI display

+ significant upgrade of the parking aid APS+ from 8 PDC sensors to a total of 12 sensors

Scope of delivery:

• 1x all necessary AUDI A6 4G original parts such as 1x PLA/PDC control unit, 4x PLA sensors, 1x switch panel with additional PLA button, etc.
• 1x pre-assembled cable set parking steering assistant front
• 1x pre-assembled cable set parking steering assistant rear
• 1x pre-assembled cable set parking steering assistant control unit
• 1x pre-assembled cable set parking steering assistant switch panel PLA
• 1x Installation instructions (German)

Installation time: approx. 5 hours

Please provide the chassis number during the ordering process

Product attributes:

The retrofitting of the original parking steering assistant / PLA is generally possible on all AUDI A6 4G pre-facelift models up to model year 2014 of all body styles (Avant, Sedan, S6, RS6) with existing parking assistance at the front + rear (APS+).

If your AUDI does not yet have the APS+ parking aid, this can also be retrofitted at any time.

Not suitable for facelift models from model year 2015.

For a facelift model from model year 2015 you need the article number 16761.

This retrofit package is planned specifically for each vehicle.

Since every AUDI A6 4G already has an electromechanical steering system as standard, the automatic parking process, in which the steering wheel is moved without the driver having to intervene, can be retrofitted.

To make retrofitting easier, we recommend installing bumpers prepared for the PLA sensors.

If you do not want to install a new bumper, the sensors are installed flush into the bumper using the brackets provided.

Installation instructions:

Remove front and rear bumpers

Insert the four new PLA sensors

Connect these sensors with the pre-assembled cable set to the existing parking aid cable set that is already in the bumper

Lay the pre-assembled cables to the parking aid control unit/PLA

Connect the parking aid/PLA control unit to the new button bar below your multimedia system

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.