Audi A6 4A C8 LED ambient lighting dashboard retrofit package

Significantly enhance your AUDI A6 4A C8 with the original LED ambient lighting.

With this retrofit package, the three white LED light strips of the lighting package can be retrofitted very easily.

The LED strips are simply replaced in place of the currently installed "dummy strips" of your AUDI A6 4A C8.

You can then adjust the brightness of these LED light guides and also the brightness of the factory-installed LED footwell lighting in the footwell using the new menu item "Ambient lighting" in your MMI and thus dim the lighting in your AUDI A6 to suit your needs.

Of course, the ambient lighting also lights up while driving, as installed at the factory.

Scope of delivery:

• - 1x Original AUDI A6 4A C8 light guide with LED driver left
• - 1x Original AUDI A6 4A C8 light guide with LED driver right
• - 1x Original AUDI A6 4A C8 light guide with LED passenger
• - 1x original AUDI A6 4A C8 trim panel driver's side (depending on model)
• - 1x original AUDI A6 4A C8 trim panel passenger side (depending on model)
• - 3x pre-assembled cable set
• - 1x installation instructions (German)

Installation time: approx. 2 hours

Please provide the chassis number during the ordering process

Product attributes:

The retrofitting of the original white LED ambient lighting in the front interior is possible on all AUDI A6 / S6 / RS6 4A C8 models of all years of manufacture, all body styles (Avant, Sedan, allroad) and all equipment variants without the currently installed lighting package (= PR number: QQ0).

The currently installed non-illuminated plastic elements are simply replaced with the original LED light guides supplied.

The necessary cladding panels with additional recess for the light guides will be planned and delivered for you depending on the chassis number provided.

Activation of the retrofit:

The procedure for activation with a diagnostic system (e.g. VCDS / ODIS) is described in the installation instructions.

If you do not have a diagnostic system, we recommend that you carry out the activation using the KECODI coding interface. You can use this to order the activation required for this retrofit via online booking.

This activation can be ordered under our article number: 10660.

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.