Audi A5 8T 8F Switch off automatic start-stop with memory function

Simply switch off the automatic start-stop system of your AUDI A5 8T 8F.

After plugging in this module, the electronics automatically remember the last setting of the start-stop system (either ON or OFF) when you start your vehicle and automatically switches the vehicle back to this mode.

If you switch OFF once, the automatic start-stop function will remain OFF until you switch it on again.

See for yourself how convenient this is to deactivate the start-stop system.

Scope of delivery:

• - 1x start-stop deactivation additional electronics
• - 1x pre-assembled cable set
• - 1x installation instructions (German)

Installation time: approx. 15 minutes

Product attributes:

Suitable for all AUDI A5 / S5 / RS5 8T 8F models of all years of manufacture (pre-facelift / facelift), all engines and all equipment variants.

Suitable for all models with start-stop button in the button bar (see image) on the MMI or behind the gearshift lever (Radio Concert / Concert / Symphony) - see product image.

NOT suitable for pre-facelift models (= up to model year 2011) with start-stop button in the coin compartment.

In contrast to complete deactivation (as some providers offer), this electronic system also offers the possibility of resetting the system to its factory settings.

Advantages of our solution:

The module can be deactivated using a key combination

At the push of a button, the start-stop automatic system is immediately back in "normal" operation

Not conspicuous during a TÜV visit etc.

Can be retrofitted at any time

NO coding work required

NOT visible in the error log of your model

Installation information:

For models with MMI navigation system: Pull out the button panel using 2 release brackets.

For models with a built-in radio without navigation (Chorus, Concert, Symphony): Lift the panel around the gear lever upwards to access the button panel - you do not need a release bracket.

Then swap the PINs according to the illustrated installation instructions.

To make re-pinning the cables easier, we recommend our release tool, which you can order at any time under item number 12036.

Insert the connectors of the additional module supplied.

COMPLETE!

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.