Audi A4 B9 8W Keyless Entry Komfortschlüssel Nachrüstpaket
Audi A4 B9 8W Keyless Entry Komfortschlüssel Nachrüstpaket
Audi A4 B9 8W Keyless Entry Komfortschlüssel Nachrüstpaket

k-electronic

Audi A4 B9 8W Keyless Entry Comfort key retrofitting package

Offer price€749.90

Including taxes. Shipping costs are calculated at checkout

Versandfertig in ca. 3-5 Tage

Need Help ?

Customer Support

We are available Monday to Friday (9:30 – 17:00), closed Saturday to Sunday and on public holidays.

Contact

Would you like to get in touch with our teams? Visit our Contact pageto send us a message.

QDK7U7LSD060UGYQ828OX

Significantly enhance your AUDI A4 B9 8W with the original comfort key.

Here we supply you with the retrofit package for installing the convenient KeylessEntry / Comfort Key function in your AUDI A4 B9 8W.

Open doors by "pulling" or "swiping" the door handle

Lock doors by "wiping" the door handle

Vehicle locked - press the trunk button - tailgate opens

No need to press a button on the key anymore - just leave it plugged in

A significant increase in comfort for your AUDI A4 B9 8W.

After briefly plugging it into the very easily accessible OBD diagnostic interface in the driver's footwell, the KECODI coding interface supplied here uses the innovative KECODI that is already pre-configured for you to fully and automatically activate the KeylessEntry / Comfort Key additional function.

Scope of delivery:

  • - 2x original AUDI A4 B9 8W keyless entry antennas
  • - 2x Original AUDI A4 B9 8W mounting material antennas
  • - 4x Original AUDI A4 B9 8W interior door handles / sensors
  • - 1x various pre-assembled cable sets
  • - 1x KECODI interface
  • - 1x KECODI interface storage case
  • - 1x installation instructions (German)

Installation time: approx. 8 hours

Product attributes:

Retrofitting the original comfort key / Keyless Go / Keyless Entry is possible on all AUDI A4 / S4 / RS4 B9 8W models of all years of manufacture (pre-facelift / facelift), all body styles (Avant, allroad, sedan) and all equipment variants.

Please check the compatibility of the currently installed comfort control unit (= control unit address 46). Experience has shown that in approximately 30% of all cases, this control unit must be replaced with a Highline control unit due to equipment requirements.

Part numbers of capable control units which are NOT to be replaced e.g.: 8W0907064CDs, 8W1907064bra, 8W1907064AP, 8W0907063CG, 8W1907064AH, 8W1907064BP, 8W0907064AH, 8W0907064FH, 8W0907064GH, 8W0907064CH

Part numbers of NON-capable control units which need to be replaced, e.g.: 8W0907064B,8W0907064BB,8W0907064EA

You are welcome to send us a written request along with the currently installed part number read out using a diagnostic system (VCDS, ODIS, KECODI, etc.). We will check this for you if the part number installed in your vehicle is not listed here.

If a replacement of the comfort control unit is necessary, we can offer this to you under article number: 10780.

Installation information:

The outer door handles are not replaced (these always fit), but the original sensors are installed inside the existing door handles; currently only "blank caps" are installed there.

In addition to the two Keyless Go antennas already installed (1x in the center console and 1x in the trunk), a total of 4 antennas are now installed in the vehicle; these two missing antennas for upgrading from KeylessGo to KeylessGo+Entry are located in the doors.

INFO: Antennas are already installed because of the standard function of starting the engine using the start button (= Keyless Go).

The existing vehicle keys are already always capable and do NOT need to be replaced.

The cable sets run from the comfort control unit (= BCM2, this is located at the rear left in the trunk) to each door.

46100QOIHW8Y