Audi A4 B9 8W illuminated LED door handle exterior ambient lighting retrofit package

Upgrade your AUDI A4 B9 8W with the original ambient lighting in the outside door handles.

Simply retrofit this part of the lighting package into your AUDI A4 B9 8W yourself.

When you unlock your AUDI A4 B9 8W at night, the white LEDs in the outer door handles light up.

Scope of delivery:

• - 1x Original AUDI A4 B9 8W LED light door handle (depending on selection)
• - 1x pre-assembled cable set
• - 1x installation instructions (German)

Installation time: approx. 1 hour per door

Please select which door you would like to retrofit.

Product attributes:

The retrofitting of the original external door handle lighting is possible on all AUDI A4 / S4 / RS4 B9 8W models of all years of manufacture (pre-facelift / facelift), all body styles (Avant, Sedan, allroad) and all equipment variants (with or without keyless entry, etc.).

The cable set connects the LED of the door handle to the door control unit which is located inside each door.

To convert all four doors you need this retrofit package four times (4x).

Decide for yourself whether you want to upgrade only one door (e.g. driver only) or several doors (e.g. driver + passenger and rear left).

The external painted door handle is always identical. The currently installed "blind cap" is replaced with the original white LED supplied here.

Product compatibility:

The vehicle manufacturer installs three different door control units (Lowline, Midline, Highline), each of which enables more or fewer additional functions.

To determine this, you can first read the door control units with a tester (e.g. KECODI, VCDS, ODIS) to determine the part number - generally:

Part number structure: XX0-959-?9X (index letter such as A, E, H, etc.)

Here the position of the ? (question mark) is important.

? = 3 = NOT capable - the door control unit must be replaced.

? = 5 = Outside door handle lighting is possible - the door control unit does not have to be replaced to retrofit the lighting package.

? = 7 = Outside door handle lighting is possible - the door control unit does not have to be replaced to retrofit the lighting package.

If it is necessary to replace a door control unit, this can be ordered under article number: 16500.

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.