Audi A4 B9 8W ambient lighting LED doors retrofit package

Significantly enhance your AUDI A4 B9 8W with the original ambient lighting in the door.

With this retrofit package, the white LED light bar in the door of your AUDI A4 B9 8W can be easily retrofitted.

Your AUDI A4 shines with a "new" splendor, especially at night.

Scope of delivery:

• - 4x original AUDI A4 B9 8W light guides (depending on door)
• - 4x original AUDI A4 B9 8W LED light white (depending on door)
• - 4x pre-assembled cable set
• - 1x illustrated installation instructions (German)

Installation time: approx. 30 minutes per door

Product attributes:

The retrofitting of the original white LED ambient lighting of the doors is possible on all AUDI A4 / S4 / RS4 B9 8W models of all years of manufacture (pre-facelift / facelift), all body styles (Avant, Sedan, allroad) with already installed or retrofitted LED footwell lighting (see article no.: 13344) or already installed LED center console lighting (see article no.: 13382) or already installed LED cup holder (see article no.: 13379).

The prerequisite is that at least one of these three LED features of the lighting package is already installed or retrofitted so that the LED ambient lighting of the door can function.

With this retrofit, the existing non-illuminated plastic element is replaced with the original LED light guide including LED and connected to the door control unit (which is located inside the door).

No changes (fitting / cutting away / gluing etc.) to the door panel are necessary (the light guide is simply inserted as installed at the factory).

You can then adjust/dim the brightness in your MMI multimedia system in the new menu item “Ambient lighting”.

Of course, as in the factory, the ambient lighting also lights up while driving, depending on the setting in the MMI.

The installation instructions include coding instructions with which you can activate the retrofit with a diagnostic system/tester (e.g. ODIS, VCDS). However, if you do not have your own diagnostic system, we can offer you the KECODI coding interface under item number: 13380, which will activate this automatically and in the shortest possible time.

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.