Audi A4 8K B8 high beam assistant retrofit package

Significantly upgrade your AUDI A4 8K with the original high beam assistant / FLA.

Here we supply you with the matching original automatically dimming interior mirror with integrated high beam assistant as well as the cable set which is necessary for this simple retrofitting.

Easily upgrade your AUDI with this convenient feature.

The high beam of your AUDI switches on automatically.

Scope of delivery:

• - 1x original AUDI A4 8K automatically dimming interior mirror with high beam assistant (depending on model)
• - 1x pre-assembled cable set (depending on model)
• - 1x installation instructions (German)

Installation time: approx. 1 hour

Please enter the chassis number during the ordering process

Product attributes:

The retrofitting of the high beam assistant / FLA is possible on all AUDI A4 / S4 / RS4 8K models of all years of manufacture (pre-facelift or facelift), all body styles (sedan, Avant, allroad) and all equipment variants.

This retrofit package is suitable for converting the currently installed manually or automatically dimming interior mirror with or without light/rain sensor and with or without front camera (= lane assist).

Of course, we can supply you with the exact interior mirror that fits your model. If the currently installed interior mirror is grey or black, for example, we can of course also supply a grey or black mirror.

Of course, this additional function will also work on models that do not currently have an automatically dimming interior mirror installed.

For some models with less equipment, it is also necessary to replace the diagnostic interface (control unit address 19 / CAN gateway) in order to be able to retrofit the high beam assistant function.

In general:

If no ACC (radar-based cruise control system), Lane Assist (lane keeping assistant = camera in the windshield) or Side Assist (radar sensors in the rear bumper with display in the exterior mirrors) is installed, the diagnostic interface or CAN gateway is NOT capable and MUST be replaced.

We would be happy to offer you the appropriate diagnostic interface under article number: 16470.

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.