Audi A3 8V high beam assistant automatic light retrofit package

Significantly upgrade your AUDI A3 8V with the original high beam assistant / FLA.

The high beam switches on or off depending on oncoming traffic.

Here we supply you with the original automatically dimming interior mirror with integrated high beam assistant for easy retrofitting in your AUDI A3 8V.

Scope of delivery:

• - 1x original AUDI A3 8V interior mirror, auto-dimming with high beam assistant / FLA (depending on model)
• - 1x pre-assembled cable set
• - 1x installation instructions (German)

Installation time: approx. 2 hours

Please provide the chassis number during the ordering process

Please select the model year during the ordering process.

Pre-facelift = UP TO model year 2016

Facelift = from model year 2017

Product attributes:

The retrofitting of the original high beam assistant / FLA is possible on all AUDI A3 / S3 / RS3 8V models of all years of manufacture (pre-facelift / facelift), all equipment variants and all body styles (3-door, sportback, convertible, sedan).

Of course, we will supply you with the matching interior mirror in the right color (e.g. crystal silver, black, Pashima beige, etc.).

Any windshield is suitable for this interior mirror - it is NEVER necessary to replace the windshield.

The cable harness runs from the interior mirror into the driver's footwell and is connected there.

The interior mirror with high beam assistant / FLA always has the automatic dimming function.

The light/rain sensor that may already be installed has nothing to do with the interior mirror - it is not touched during installation.

If a Highline diagnostic interface is already installed, no replacement is necessary.

Highline features: built-in multifunction steering wheel, built-in LED headlights, built-in MMI plus navigation system with touch input, radar cruise control, Side Assist lane change assistant, etc.

If a Lowline or Midline Gateway is currently installed, it must be replaced

How do you recognize a HIGH control unit? Either remove the STG in the driver's footwell as it is printed on it or simply read your AUDI with a tester; the control unit ID of address 19 contains the note LOW, MID or HIGH.

If an automatically dimming interior mirror is not currently installed, this can also be retrofitted with the complete package supplied here.

manufacturer's specifications

k-electronic GmbH
Waldeckstraße 2, 86529 Schrobenhausen DE

0049 / (0) 8252 / 40 69 – 10
support@k-electronic.de

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.