Audi A1 8X Bluetooth music streaming Radio Chorus retrofit package

You want to stream/play music via Bluetooth from your mobile phone to your Chorus radio system.

Here we supply you with the retrofit package for installing a Bluetooth streaming function in your AUDI A1 8X with Radio Chorus and AUX-IN connection already installed at the factory.

The control of the tracks and the display of the track names is done via the mobile phone - technically speaking, the audio signal is fed into the MMI via the AUX-IN input.

Scope of delivery:

• - 1x pre-assembled cable set
• - 1x Bluetooth receiver
• - 1x installation instructions (German)

Installation time: approx. 30 minutes

Product attributes:

The retrofitting of this A2DP Bluetooth interface for the transmission of audio signals (= streaming music via your mobile phone with the vehicle speakers) is possible on all AUDI A1 / S1 8X models of all years of manufacture (pre-facelift / facelift) WITH installed Radio Chorus (= PR number: 8UA) as well as WITH already factory-installed AUX-IN input (= with already installed AUX-IN socket).

NOT suitable for models with built-in MMI3G / 3G+ navigation system (e.g. PR number: 7T2 or 7T6)

NOT suitable for models with built-in RMC infotainment system without navigation system (e.g. PR number: 8AL)

NOT suitable for models without a factory-installed AUX-IN input (= without input for jack plug, e.g. PR number: UF0).

With this solution offered here, the control of the tracks and the display of the track names is done via the mobile phone - technically speaking, the audio signal is fed into the Radio Chorus via the AUX input.

Any existing Bluetooth hands-free system can of course continue to be used in parallel.

Installation information:

Pull out the radio.

To easily dismantle the radio unit, we recommend using our release bracket, which you can order at any time under item number 75005.

Mount the cable set behind the radio and place the Bluetooth receiver firmly connected to it.

No coding is required - the system works immediately!

Technical information about the Bluetooth receiver:

Voltage: +12V DC

Power consumption including remote output:

We receive a large number of custom orders and inquiries daily, so it is not always possible for us to have every item in stock at all times. If you need the item urgently, please contact our sales team here to check the stock before making your purchase.

We completely understand if you are unsure whether a part is compatible with your car. We therefore strongly recommend that you contact us here with your inquiry . Our friendly sales team will then contact you to confirm if this part is the correct part you are looking for.

All our products come with a standard 2 year warranty. However, this depends on the type of product. Further details can be found here .

At Upgrade my Car (R-Trade GmbH) we attach great importance to informing our customers comprehensively about the intended use of our products. Please note that unless otherwise stated, all of our products are specifically designed for professional racing use. These are intended solely for use in competition on circuits approved by an officially recognized racing organization. Please note that any use of our products other than these Terms, including recreational off-road driving, may potentially violate local, state or federal law. It is important to understand that Upgrade my Car (R-Trade GmbH) assumes no liability for the legality of using our products on public roads. The responsibility for compliance with applicable laws lies solely with the buyer. We strongly recommend that our customers familiarize themselves with the relevant legal regulations and comply with them before using our products.